![background image](http://html1.mh-extra.com/html/stihl/fb-131/fb-131_instruction-manual_1379092016.webp)
FB 131
English
14
1
Blade (marked 4180/00)
Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
Adjusting the Loop Handle
N
Use the combination wrench to
loosen the screw (1).
N
Turn the handle to the vertical
position.
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 6 in (15 cm)
N
Slide the handle to the required
position.
N
Tighten down the screw with the
combination wrench so that the
handle cannot be rotated on the
drive tube.
Approved Cutting
Attachments
9924BA007 KN
1
Mounting the Loop Handle
1
239BA008 KN
0000-GXX-1563-A0
A
0000-GXX-1562-A0