Stihl BT 130, Инструкция по эксплуатации

Страница: 16 / 68

BT 130
English
14
N
Switch off the motor and activate the
auger brake – see "Auger brake"
N
Put down the auger – drilling spindle
facing upwards
N
Pull the retaining pin (1) out of the
auger shaft
N
Push the auger (2) onto the drilling
spindle until the holes (3) align
N
Insert the retaining pin into the hole
N
Fold down the spring clip of the
retaining pin so that it encloses the
auger shaft
Engaging the Auger Brake
N
Move the activating lever to
position A .
Starting
N
Press down the trigger lockout
lever (1), then squeeze the throttle
trigger (2)
N
and hold them in that position.
N
Move the slide control (3) to START
and hold it there.
N
Now release the throttle trigger,
slide control and trigger lockout in
that order. This is the starting
throttle position.
Fitting the Auger
9912BA010 KN
1
2
3
3
Starting / Stopping the
Engine
9912BA008 KN
A
9912BA01
1 KN
ST
ART