Stihl BR 600, Инструкция по эксплуатации

Страница: 20 / 32

BR 500, BR 550, BR 600
English
18
N
Push the setting lever (1) upwards.
The throttle trigger (2) is in the full
throttle position.
N
Move the setting lever (1) to
C
.
N
Engage the throttle trigger (2) in the
full throttle position.
N
Continue cranking until the engine
runs.
Other Hints on Starting
If the engine does not start
N
Check that all settings are correct.
N
Check that there is fuel in the tank
and refuel if necessary.
N
Check that the spark plug boot is
properly connected.
N
Repeat the starting procedure.
N
Check adjustment of throttle cable –
see chapter on "Adjusting the
Throttle Cable".
Engine stalls in cold start position
c
or
under acceleration
N
Move the choke knob to
o
and
continue cranking until the engine
runs.
Engine does not start in warm start
position
o
N
Move the choke knob to
c
and
continue cranking until the engine
runs.
Fuel tank run until completely dry
N
After refueling, press the manual
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
N
Set the choke knob according to
engine temperature.
N
Now start the engine.
During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".
2
1
0000-GXX-1401-A0
0000-GXX-1402-A0
Operating Instructions