44
BR 500, BR 550, BR 600
:
Remove the sleeve (1).
:
Check flange (2) and manifold (3)
for damage and replace if
necessary.
:
If necessary, pull the flange (2) off
the manifold (3).
452RA128
1
3
VA
2
Install in the reverse sequence.
:
When installing, check that the
notches (arrows) in the manifold
line up with the screw sleeves in
the flange.
:
Make sure the sleeve (1) is
properly seated.
:
When installing, check that the
groove in the manifold is properly
seated in the fan housing (arrow).
452RA098
VA
– Fit the carburetor, line up the
flange and manifold so it is
straight and then secure the
clamp.
– Carefully tighten down the clamp
until the distance between the
tabs is 5–6 mm.
Use new gaskets.
Install all other parts in the reverse
sequence.
Exercise extreme caution when
carrying out maintenance and repair
work on the ignition system. The
high voltages which occur can
cause serious or even fatal
accidents.Troubleshooting on the
ignition system should always begin
at the spark plug,
b
4.2.
The solid state (breakerless)
ignition system basically consists
of an ignition module (1) and
flywheel (2).
452RA129
VA
2
1
8.
Ignition System
RA_452_00_01_02.book Seite 44 Donnerstag, 16. Februar 2012 11:52 11
Содержание BR 550
Страница 1: ...STIH STIHL BR 500 550 600 2009 05 ...
Страница 61: ...60 BR 500 BR 550 BR 600 ...
Страница 62: ...englisch english 0455 452 0123 VA0 B12 FST Printed in Germany ...
