Stihl BGE 60, Инструкция по эксплуатации

Страница: 5 / 18

5HSODFHPHQW3DUWV
When servicing use only identical
replacement parts. Polarized plugs: To
reduce the risk of electric shock, this
equipment has a polarized plug (one
blade is wider than the other) This plug
will fit in a polarized outlet one way. If the
plug does not fit fully in the outlet, rever-
se the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any
way. Replace damaged cords or have
them repaired by authorized STIHL
Servicing dealer only.
&RUG6HWV
Make sure your cord set is in good
condition. When using an extension cord
set, be sure to use one heavy enough to
carry the current your product will draw.
An undersized extension cord set will
cause a drop in line voltage resulting in
loss of power and overheating. Table
below shows the correct size to use
depending on cord length and nameplate
ampere rating. If in doubt, use the next
heavier gage. The smaller the gage
number, the heavier the cord.
Minimum wire gage for extension cords
for 120 Volt appliances using
6 - 10 Amps
Cord types SJW-A or SJTW-A
marked "outdoor use"
Cord length (ft) 50 100 150
Wire gage (AWG) 16 14 12
Appropriate extension cords are
available in special stores for electrical
equipment or from your STIHL dealer.
To reduce the risk of disconnection of
appliance cord from the extension cord
set during operating:
•
Insert unit’s plug
into extension cord coupling .
•
Swing the flap outward and
push extension cord into the recess.
•
Let go of the flap.
1
358BA007 KN
2
3
%*(
Downloaded from ManualsNet.com search engine