12
English
BF-MM, BK-MM
Removing Existing MultiTools
:
Wear gloves to reduce the risk of
injury from contact with sharp
MultiTools and/or hot surface of
gearbox.
:
Remove the hitch pin and pull the
MultiTools (if fitted) off the shaft.
:
Clean the gearbox if necessary.
See also "Mounting the MultiTool" in the
instruction manual of the other MultiTool
Checking Position of Gearbox
To reduce risk of injury from MultiTool
rotating in the wrong direction, check
that position of gearbox is correct and
adjust if necessary.
The gearbox output shaft (
1
) must be
below the drive tube (
2
) so that the
MultiTool rotates in the direction of the
arrow (
3
).
Adjusting Position of Gearbox
:
Loosen clamp screws on gearbox.
:
Turn gearbox through 180°.
:
Line up the gearbox in the correct
position.
:
Tighten down the two clamp screws
on the gearbox in the following
sequence:
–
Tighten first screw moderately.
–
Tighten second screw moderately.
–
Tighten down first screw firmly.
–
Tighten down second screw firmly.
Mounting the MultiTool
481BA008 KN
2
469BA043 KN
1
3
Содержание BF-MM
Страница 1: ...Instruction Manual STIH STIHL BF MM BK MM BA_U1_01_01 fm Seite 0 Freitag 22 Februar 2008 10 56 10 ...
Страница 20: ...19 BF MM BK MM English ...
Страница 21: ...20 English BF MM BK MM ...
Страница 22: ...0458 484 0121 englisch English BA_U4_01_01 fm Seite 1 Freitag 22 Februar 2008 10 56 10 ...
