2
English / USA
BC-KM
In the STIHL CombiSystem™ a number
of different CombiEngines and
CombiTools can be combined to
produce a power tool. In this instruction
manual the functional unit formed by the
CombiEngine™
and
CombiTool™ is
referred to as the power tool.
The CombiEngine and CombiTool come
with separate instruction manuals.
Always
read
and make sure you
understand
both
instruction manuals
before starting and using your machine.
Keep the manuals in a safe place for
later reference.
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:
Step or procedure without direct
reference to an illustration.
Description of step or procedure that
refers directly to the illustration and
contains item numbers that appear in
the illustration.
Example:
Loosen the screw (
1
)
Lever (
2
) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Warning where there is a risk of
damaging the machine or individual
components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
CombiSystem
..
..
002BA159 KN
+
+
Guide to Using this Manual
