![background image](http://html.mh-extra.com/html/stihl/5910/5910_instruction-manual_1379511019.webp)
MDG 1
English
17
Wall outlet
Mains voltage and the operating voltage
of the power supply unit must be the
same.
N
Select the mains plug adapter that
suits the wall outlet.
N
Slide the adapter into the power
supply unit's slot (1) – the adapter
must snap into position.
To remove the adapter:
N
Depress the latch (2) and pull out
the adapter.
N
Connect cord (1) to analyzer’
socket and the power supply unit's
receptacle (2) – note coding of
connections.
N
Tighten down the connections.
N
Insert the power supply unit in a wall
outlet.
STIHL AAD 1 analyzer battery adapter
N
Connect cord (1) to MDG 1 plug (B)
and AAD 1 socket (2) and tighten
down the connections
Self test
A self test is performed after the
analyzer is connected to the power
supply.
During this process the LED (1) on the
analyzer glows green, then yellow, then
red and then continuously green – end of
self test.
LED (1) glows continuously red: internal
malfunction – replace the analyzer.
LED (1) flashes green. Supply voltage
too low. Ensure correct supply voltage
and restart analyzer. The analyzer must
be reintroduced to SDS.
LED (2) flashes white: Analyzer ready
for operation – no connection to
computer – check connection.
Connecting Analyzer to
Power Supply
1
2
5901BA001 KN
0000-GXX-0635
1
2
B
1
2
5901BA013 KN
A
2
1
5901BA003 KN
B
0/
Содержание 5910
Страница 377: ...MDG 1 slovenščina 375 ...
Страница 378: ...MDG 1 slovenščina 376 ...
Страница 379: ......
Страница 380: ...www stihl com 04587609921B 0458 760 9921 B 0458 760 9921 B INT1 DGFEhSfIdNcHPsbnRLrgTtVJpelBWYy ...