Page 18
Technical Information 08.2005
TI_08_2005_11_01_02.fm
5.6
Mounting the blower tube and arrester
.
Clip the sleeve on the arrester into the holder
(
arrow
).
.
Run the arrester (
1
) through the blower tube (
2
).
.
Shove blower tube (
3
) onto blower tube (
2
), and
lock the buttons (
4
)
.
Run the arrester (
1
) through the sliding ring (
5
).
.
With its wide lip facing left, shove the sliding
ring (
5
) onto the blower tube end section (
2
).
.
Run the arrester (
1
) through the hose clip (
6
)
(hose clip without the retention groove for the
throttle cable) – screw head facing forward.
.
Run the arrester (
1
) through the pleated
hose (
7
).
.
Shove the blower tube (
2
) into the pleated
hose (
7
).
.
Tighten the hose clip (
6
) with the screw (
8
).