![background image](http://html1.mh-extra.com/html/stihl/029-039/029-039_service-manual_1378802050.webp)
STIHL 029, 039
50
- Take the lower mounting screws
out of the front handle.
- Remove the plugs from the annular
buffers on the front handle.
- Take out the front handle mounting
screws.
- Pull the front handle down and off
the handle housing, and then take
it away to the rear.
Assemble in the reverse sequence.
- Remove the front handle –
- Remove the carburetor –
- Slip the washer off the mounting
studs and take the sleeve out of
the manifold.
- Pull the short circuit wire's con-
nector sleeve out of the switch
shaft.
Top:
1 = Washer
2 = Sleeve
Bottom:
Withdrawing short circuit wire
Top:
Front handle mounting
screws
Bottom:
Removing the front handle
8.
HANDLE HOUSING
8.1
Front Handle
Top:
Lower mounting screws on front
handle
Bottom:
Plugs
8.1.1
Removing and Installing
Handle Housing