Stiga Stig 1200, Инструкция по эксплуатации, Страница: 30 / 204

26 EN
4. INSTALLATION
4.5.3. CHARGING BASE INSTALLATION
CAUTION:
Danger of cutting hands.
CAUTION:
Danger of dust in
the eyes.
ELECTRICAL HAZARD:
Connect the power supply only at the end of
all the installation operations. If necessary
during the installation, turn off the general
power supply.
Requirements and obligations:
• Flat land • Compact soil
• Charging base • Perimeter cable
• Power supply • Fixing pegs
• Screwdriver • Hammer
• Electrician's scissors • Gloves
• Glasses
GLOVES OBLIGATION:
Use protective gloves to avoid
cutting your hands.
GLASSES OBLIGATION:
Use safety glasses to avoid the
danger of dust in the eyes.
The charging base can be installed:
• aligned with the perimeter cable so that the robot can access it by navigating the perimeter cable
clockwise.
Procedure:
1. Check the installation requirements as shown in Par. 4.3 .
2. If necessary, prepare the ground so that the surface of the charging base (A) is at the same level
as the lawn (B), the ground must be perfectly fl at and compact in order to avoid deformation of the
surface of the charging base.
B
A