EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
3
1)
If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear safetyglas-
ses and hearing protection.
2)
Warning! Danger. Failure to use this machine
cor rectly can be hazardous for oneself and
o thers.
3)
Read the instruction manual before using the
machine.
4)
Disconnect the plug from the mains before
commencing maintenance work or if the power
cord is damaged.
5)
Do not leave the machine in the rain (or in
damp conditions).
1
2
3
4
5
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than the one indicated. Safety
measures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions.
In this regard, all the operational cycle phases must be taken into consideration, such as switching off or idle running.
Maximum noise and vibration levels [1]
Model
SHT 500
SHT 600
Sound pressure level
dB(A)
84
86
– Measurement uncertainty
dB(A)
3
3
Measured acoustic power level
dB(A)
92
94,9
– Measurement uncertainty
dB(A)
3
3
Guaranteed sound power level
dB(A)
98
98
Vibration level
m/s
2
2,85
2,99
– Measurement uncertainty
m/s
2
1,5
1,5
TECHNICAL DATA
Model
SHT 500
SHT 600
Power supply voltage
V~
230-240
230-240
P
ower supply frequency
Hz
50
50
Engine Power
W
500
600
Cutting lenght
cm
45
55
Cutting movements
min
-1
1700
1700
Mass
Kg
3,1
3,3
2. SYMBOLS
All manuals and user guides at all-guides.com
