Edition
Manual
Product
Page
2008-03-18 Workshop Manual, Stiga Primo 6 Mower Decks
9
6.3.6 Replacing driving belt
To replace the drive belt, it is not necessary to
disassemble the deck from the machine.
Replace the driv belt as follows:
1. Remove the deck cover by unscrewing the 3
fastening screws. See the figure.
The fourth screw shall not be removed.
2. Remove the belt guide (A) by unscrewing its
two screws.
3. Loosen the belt from the machine. See previ-
ous sections.
4. Fit the new belt and reassemble in the
reverse order. See also previous sections.
6.3.7 Replacing timing belt
To replace the timing belt, disassemble the
deck from the machine.
Replace the timing belt as follows:
1. Disassemble the deck from the machine. See
previous sections.
2. Remove the deck cover by unscrewing the 3
fastening screws. See the figure above.
3. Remove the belt guide (A) by unscrewing its
two screws. See the figure above.
4. Remove the belt pulley from the left shaft by
unscrewing its screw.
A