Stiga P901, Руководство пользователя, Страница: 7 / 17

ENGLISH
GB
SEAT
Install the seat on the seat bracket (fig. 10).
In the rear holes, the screws H should be used
along with the shoulder washers G. Tighten the
screws.
Then place the knobs I with the washers J in the
front holes.
The seat can be moved backwards or forwards.
Place the seat in the desired position and then tight-
en the knobs properly.
The seat can be folded. If the machine is parked
outside when it is raining, fold the seat forward to
protect the seat cushion from getting wet.
A heated, protective seat cover is available as an
accessory. May be ordered from your dealer.
ARMRESTS
The armrests and the installation components are
supplied in a separate box.
First screw the left and right mounts onto the seat
using the six screws supplied (fig. 11).
Then install the armrests in the mounts. A spacer
(1) is placed on either side of the mount, inside the
armrest. Tighten with screw (2) and nut (3), but not
so hard that the armrest cannot be folded up.
STEERING WHEEL
In order to compensate for any axial play, the shim
washers E and/or F should be used.
First check whether and if so how many shim
washers are required.
Then install the steering wheel by knocking in the
tension pin D (fig. 12).
DRAWING PLATE
Screw the drawing plate K into the two holes on the
underside of the bumper using screws L and nuts M
(fig. 13). Tighten the screws properly.
TYRE PRESSURE
Check the air pressure in the tyres. Correct air
pressure:
Front: 0.6 bar (9 psi), Rear: 0.4 bar (6 psi)
ACCESSORIES
For the installation of accessories, see separate in-
stallation guide supplied with each accessory.
GENERAL
You must read these instructions for
use and the accompanying pamphlet
“SAFETY INSTRUCTIONS” careful-
ly, before starting up the machine.
SYMBOLS
The following symbols can be found on the ma-
chine to remind you of the care and attention that
are required during use.
The symbols mean:
Warning!
Read the instruction manual and the safety
manual before using the machine.
Warning!
Watch out for discarded objects. Keep on-
lookers away.
Warning!
Always use hearing protectors.
Warning!
This machine is not designed to be driven
on public roads.
Warning!
The machine, equipped with original ac-
cessories, must not be driven in any direc-
tion on slopes with a gradient greater than
10º.
Warning!
Risk of crushing injuries. Keep hands and
feet well away from the articulated steer-
ing joint.
Warning!
Risk of burn injuries.
CONTROLS AND
INSTRUMENTS
Items 1 -16, see figures 1 -4.
1. HYDRAULIC LIFT
Hydraulic implement lifter for raising front-
mounted implements to the transport position.