background image

operATIoN 

 

Settings

16

 | WSH 10 | WSH 20 

www.stiebel-eltron.com

Symbols

Symbol

Description

Touch the touch area 

 

 

Move your finger away from the touch area 

 

 

The LED on the sensor flashes 

 

 

Water is running from the tap 

 

 

The water flow has been interrupted 

 

 

4.3  Standard settings

4.3.1  Setting the water run-on time

The water run-on time can be set between 0 and 10 seconds.
Factory setting: approx. 1 second

 2 s

 1x

f

f

Touch the touch area for 2 sec-

onds. The green LED lights up 

once.

 5 s 

 1x/1x 

f

f

Touch the touch area for 5 sec-

onds. The green LED flashes 

briefly. The red LED flashes 

once.

 0-10 s  

 

 

 0-10 s 

 

 

f

f

Keep your finger on the touch 

area for the period of time you 

want the water to run on for. 

Water runs while you make 

the setting.  

Setting: 1 - 10 seconds = water 

run-on time.

 1x

f

f

If you move your finger away 

from the touch area, the green 

LED lights up once to confirm. 

4.3.2  Adjusting the sensor range

The sensor range can be adjusted to suit the washbasin. This 

prevents the sensor tap from running independently.
Factory setting: distance 6

 2 s

 1x

f

f

Touch the touch area for 2 sec-

onds. The green LED lights up 

once.

 2x 

 

 2x/1x 

f

f

Touch the touch area briefly 

twice (0.5 seconds). The green 

LED gives two short flashes 

and one long flash. The red 

LED pulses.

 15 s 

 

 

1x

2x

3x

4x

5x

7x

8x

 6 x 

 4x 

 

 ...x 

 

Factory setting 

 

 

 

 

 

 

 

 

 

f

f

Hold your finger on the touch 

area (ignore the red LED 

which flashes four times after 

5 seconds). After approx. 

15 seconds, the red LED flash-

es one to eight times, indicat-

ing distances 1 - 8.

f

f

Move your finger away from 

the touch area. The red LED 

flashes according to the se-

lected distance. 

f

f

Wait approx. 10 seconds until 

the setting has been complet-

ed. The green LED lights up 

once to confirm. 

 

 

4.4  Extended settings

4.4.1  Setting the draw-off pause

You can interrupt the flow of water for approx. 2 minutes to be able 

to clean the sensor tap and washbasin, etc., without inadvertently 

triggering the flow of water.

Activating the draw-off pause

 2 s

 1x

f

f

Touch the touch area for 2 sec-

onds. The green LED lights up 

once.

 2x 

 2x/1x 

f

f

Touch the touch area briefly 

twice (0.5 seconds). The green 

LED gives two short flashes. 

The red LED pulses.

 

 ...

f

f

The flow of water is interrupt-

ed for 2 minutes. The red LED 

pulses.

Содержание WSH 10













Отзывы: