INSTALLATION
Specification
32
| WPL 10 AC | WPL 10 ACS
www.stiebel-eltron.com
15.8 Data table
The performance data apply for new appliances with clean heat exchangers.
The power consumption figures for the integral auxiliary drives are maximum values and may vary subject to operating point.
The power consumption of the integral auxiliary drives is included in the output details of the heat pump (to EN 14511).
WPL 10 AC
WPL 10 ACS
230236
227995
Heating output
Heating output at A10/W35 (EN 14511)
kW
8.29
8.49
Heating output at A7/W35 (EN 14511)
kW
7.83
7.72
Heating output at A2/W35 (EN 14511)
kW
6.74
6.53
Heating output at A-7/W35 (EN 14511)
kW
5.11
4.94
Heating output at A7/W45 (EN 14511)
kW
7.26
7.22
Heating output in silent mode at A-7/W35 max.
kW
4.85
4.69
Cooling capacity at A35/W7
kW
6.22
6.39
Cooling capacity at A35/W18
kW
9.12
9.31
Power consumption
Power consumption at A10/W35 (EN 14511)
kW
2.06
2.11
Power consumption at A7/W35 (EN 14511)
kW
2.03
2.05
Power consumption at A2/W35 (EN 14511)
kW
1.92
1.94
Power consumption at A-7/W35 (EN 14511)
kW
1.67
1.73
Power consumption at A7/W45 (EN 14511)
kW
2.25
2.26
Power consumption, cooling at A35/W18
kW
3.16
3.26
Power consumption, cooling at A35/W7
kW
2.56
2.61
Power consumption, emergency/booster heater
kW
8.8
6.2
Power consumption, fan heating max.
kW
0.11
0.11
Coefficient of performance
COP at A10/W35 (EN 14511)
4.02
4.02
COP at A7/W35 (EN 14511)
3.86
3.77
COP at A2/W35 (EN 14511)
3.51
3.37
COP at A-7/W35 (EN 14511)
3.06
2.86
COP at A7/W45 (EN 14511)
3.22
3.19
Cooling capacity factor at A35/W18
2.95
2.86
Sound data
Sound power level outdoor installation (EN 12102)
dB(A)
59
59
Sound pressure level at 5 m distance in a free field
dB(A)
37
37
Sound pressure level at 10 m distance in a free field
dB(A)
31
31
Max. sound power level, silent mode
dB(A)
57
57
Application limits
Min. application limit on the heating side
°C
15
15
Max. application limit on the heating side
°C
60
60
Min. application limit, heat source
°C
-20
-20
Max. application limit, heat source
°C
40
40
Water hardness
°dH
≤3
≤3
pH value (with aluminium compounds)
8.0-8.5
8.0-8.5
pH value (without aluminium compounds)
8.0-10.0
8.0-10.0
Chloride
mg/l
<30
<30
Conductivity (softening)
μS/cm
<1000
<1000
Conductivity (desalination)
μS/cm
20-100
20-100
Oxygen 8-12 weeks after filling (softening)
mg/l
<0.02
<0.02
Oxygen 8-12 weeks after filling (desalination)
mg/l
<0.1
<0.1
Energy data
Energy efficiency class
A+/A+
A+/A+
Electrical data
Starting current (with/without starting current limiter)
A
25/39
26/-
Compressor fuse/MCB
A
C16
C25
MCB/fuse protection, emergency/booster heater
A
B16
B 35
MCB/fuse protection, controller
A
B16
B16
Frequency
Hz
50
50
Rated voltage, compressor
V
400
230
Rated voltage, emergency/booster heater
V
400
230
Rated voltage, controller
V
230
230
Phases, compressor
3/N/PE
1/N/PE
Phases, controller
1/N/PE
1/N/PE
Phases, emergency/booster heater
3/N/PE
1/N/PE
