STIEBEL ELTRON WPE-I 04 H 230 Premium, Эксплуатация и установка

Страница: 3 / 48

SPECIal INfOrmaTION
www.stiebel-eltron.com WPE-I H(K) 230 Premium | 3
SPECIal INfOrmaTION
- The appliance may be used by children over 8
years of age and persons with reduced physi-
cal, sensory or mental capabilities or a lack of
experience and expertise, provided that they
are supervised or they have been instructed
on how to use the appliance safely and have
understood the potential risks. Children must
never play with the appliance. Cleaning and
user maintenance must not be carried out by
children without supervision.
- The connection to the power supply must be
in the form of a permanent connection. En-
sure the appliance can be separated from the
power supply by an isolator that disconnects
all poles with at least 3 mm contact separa-
tion.
- Maintain the minimum clearances to ensure
trouble-free operation of the appliance and
facilitate maintenance work.
- In dual mode operation, return water from
the second heat generator may flow through
the heat pump. Please note that the return
water temperature may be a maximum of
60 °C.
- Maintenance work, such as checking the elec-
trical safety, must only be carried out by a
qualified contractor.
- We recommend regular inspection (to es-
tablish the current condition of the system),
and maintenance by a qualified contractor if
required (to return the system to its original
condition).
- Following disconnection from the power sup-
ply, parts of the appliance may remain ener-
gised for 5 minutes until the inverter capaci-
tors have discharged.
- Never interrupt the power supply, even out-
side the heating season. The system's active
frost protection is not guaranteed if the power
supply is interrupted.
- There is no need to shut the system down in
summer. The heat pump manager has an au-
tomatic summer/winter changeover.
WPE-I HK 230 Premium
- The appliance is only suitable for passive
cooling.
- In the delivered condition, theCOOLING pa-
rameter is set to OFF.
- The COOLING menu will only be displayed if a
FET is connected. Cooling mode is only possi-
ble in summer mode.