20
| EBK | KBA www.stiebel-eltron.com
INSTALLATION
Installation
45
143
154
180
26
�0
2�
04
�0
14
4
f
f
Using the installation template, transfer the dimensions of
the wall mounting to the wall. To do so, loosely screw the in-
stallation template with tap connection to the wall.
f
f
Drill the holes.
EBK 5 K
26�02�04�0127
26
�0
2�
04
�0
12
7
1
2
3
1 Twin connector with throttle screw
2 Plastic sleeve
3 White-coated two-handled lever tap
f
f
Screw in the twin connector.
f
f
Slide the plastic sleeve onto the twin connector.
105
+15
1
2
26
�0
2�
04
�0
13
1
1 Screw depth specification
2 White-coated two-handled lever tap with throttle screw
f
f
Screw in the tap, taking care to observe the screw depth
specification.
f
f
Attach the tap outlet.
KBA 5 KA
105
+15
1
2
26
�0
2�
04
�0
13
2
3
1 Screw depth specification
2 Chrome-coated three-handled tap with throttle screw
3 Extensions
f
f
Screw in the tap with the extensions, taking care to observe
the screw depth specification.
f
f
Attach the tap outlet.
EBK 5 K
12 + x
22 + x
105 + x
230
26
�0
2�
04
�0
15
4
2
1
KBA 5 KA
12 + x
22 + x
105 + x
230
2
26
�0
2�
04
�0
15
6
1
1 Wall mounting bracket
2 Height specification
x Increase of tap insertion depth / distance of tabs from the
wall mounting bracket: maximum 15 mm.
Note
If the tap insertion depth is greater than
105 mm, adapt the bend in the tabs of the wall mounting
bracket (see illustration).
f
f
Fit the wall mounting bracket using the rawl plugs, washers
and screws supplied.
f
f
Align the wall mounting bracket using a spirit level. Take
care to observe the height specification. If the wall is uneven,
the wall mounting bracket can be secured using additional
screws at the bottom.