STIEBEL ELTRON DHE?18 SLi 25 A, Инструкции по эксплуатации и монтажу

Страница: 20 / 22

40 |DHE SLi www.stiebel-eltron.com
InStaLLatIOn
specification
16.7 Data table
DHE 18 SLi 25 a DHE 18/21/24 SLi DHE 27 SLi
227492 227493 227494
Electrical data
Rated voltage
V 380 400 415 380 400 415 380 400 415
Rated output kW 16.2 18 19.4 16.2/19/21.7 18/21/24 19.4/22.6/25.8 24.4 27 29.1
Rated current A 24.7 26 27 27.6/31.4/33.3 29/33/35 30.1/34.3/36.3 37.1 39 40.5
Fuse/MCB rating A 25 25 32 32/32/35 32/32/35 32/35/40 40 40 40
Phases 3/PE 3/PE 3/PE
Frequency Hz 50/60 50/60 50/-
Max. mains impedance at 380 V / 50 Hz Ohm 0.3 0.33 0.2
Max. mains impedance at 380 V / 60 Hz Ohm 0.36 0.4
Max. mains impedance at 400 V / 50 Hz Ohm 0.28 0.31 0.19
Max. mains impedance at 400 V / 60 Hz Ohm 0.34 0.38
Max. mains impedance at 415 V / 50 Hz Ohm 0.27 0.3 0.18
Conductivity at 15 °C mS/m 111 111 111
Specific resistance (≤25 °C) Ohm cm 900 900 900
Specific resistance (≤55 °C) Ohm cm 900 900 900
Connections
Water connection
G 1/2 A G 1/2 A G 1/2 A
Application limits
Max. permissible pressure
MPa 1 1 1
Max. inlet temperature for reheating °C 55 55 55
Values
Max. permissible inlet temperature
°C 65 65 65
On l/min > 2.5 > 2.5 > 2.5
Flow rate for pressure drop l/min 5.2 5.2/6.0/6.9 7.7
Pressure drop at flow rate MPa 0.04 0.04/0.06/0.08 0.1
DHW delivery l/min 9.2 9.2 / 10.7 / 12.3 13.8
Delta T if presented K 28 28 28
Hydraulic data
Nominal capacity
l 0.4 0.4 0.4
Versions
Connected load options
- X -
Temperature setting °C 20-60 20-60 20-60
Safety category 1 1 1
Insulating block Plastic Plastic Plastic
Heating system Bare wire Bare wire Bare wire
Cap and back panel Plastic Plastic Plastic
Colour White White White
IP rating IP25 IP25 IP25
Dimensions
Height/width/depth
mm 478 225 105 478 225 105 478 225 105
Weights
Weight
kg 4.5 4.5 4.5
299680_DHE_18-27_SLi_de_en_fr_nl_pl_cs_bg_ru.indb 40 05.03.2013 08:38:31