STIEBEL ELTRON DHE 18 AU Скачать руководство пользователя страница 3

SpECiAl iNfOrmATiON 

 

 

EN

GL

ISH

www.stiebel-eltron.com 

DHE  AU | 

3

SpECiAl iNfOrmATiON

 

- The appliance may be used by children over 

3 years of age and persons with reduced 

physical, sensory or mental capabilities or a 

lack of experience and expertise, provided 

that they are supervised or they have been 

instructed on how to use the appliance safe-

ly and have understood the potential risks. 

Children must never play with the appliance. 

Cleaning and user maintenance must not be 

carried out by children without supervision.

 

- The fitting can reach a temperature of up to 

70 °C when using preheated water. There is a 

risk of scalding at outlet temperatures in ex-

cess of 43 °C.

 

- The appliance is suitable for supplying a 

shower (shower operation). If the appliance 

is also or exclusively used for shower opera-

tion, the qualified contractor must adjust the 

temperature setting range to 43 °C using the 

internal anti-scalding protection on the ap-

pliance. When using preheated water, ensure 

that the inlet temperature does not exceed 

55 °C.

 

- In Australia, the use of a temperature control-

ler is required to meet the requirements of 

AS 3498 when showers, bathtubs or washba-

sins are supplied with water. The maximum 

temperature of 50 °C must not be exceeded.

 

- Ensure the appliance can be separated from 

the power supply by an isolator that discon-

nects all poles with at least 3 mm contact 

separation.

 

- The specified voltage must match the power 

supply.

 

- The appliance must be connected to the earth 

conductor.

 

- The appliance must be permanently connect-

ed to fixed wiring.

 

- Secure the appliance as described in chapter 

"Installation / Installation".

 

- Observe the maximum permissible pressure 

(see chapter "Installation / Specification / Data 

table").

 

- The specific water resistivity of the mains 

water supply must not be undershot (see 

chapter "Installation / Specification / Data 

table").

 

- Drain the appliance as described in chapter 

"Installation / Maintenance / Draining the 

appliance".

Содержание DHE 18 AU

























Отзывы: