INSTALLATIoN
Montage
40
| Set FFB www.stiebel-eltron.com
AVERTISSEMENT Électrocution
Faites attention à ce que les vis n’abîment pas les
câblages existants.
f
f
Afin d’éviter tout contact, montez la plaque de protection à
l’aide des clip-rivets (la plaque de protection et les clip-rivets
font partie de la livraison).
T-Soll
D
00000
56
37
6
f
f
Branchez la fiche du bloc d’alimentation encastré sur l’unité
de commande « T consigne ».
f
f
Positionnez l’unité de commande dans le boîtier mural
jusqu’à ce que les 4 crochets d’arrêt soient parfaitement
enclenchés.
f
f
L’unité de commande du Set FFB W est enregistrée
par l’appareil. Enregistrez l’unité de commande du Set
FFB W Plus EU sur le chauffe-eau instantané (voir les
instructions d’installation et d’utilisation du DHE Connect et
du DHE Touch au chapitre « Apprentissage d’unités de
commandes nouvelles / supplémentaires»). ».
6.3 Set FFB W et Set FFB W Plus EU - Montage sans
plaque murale
Il est possible de monter le set sans plaque murale directement
sur un boîtier encastrable.
D
00000
62
27
2
f
f
Faites sortir le câblage électrique par le bord du boîtier
encastrable.