© copyright Sti Srl - Rev. 0607 Vietata la divulgazione c/o riproduzione anche parziale
17
►
Before starting steam cleaning, blow off the initial condensation in the conducts in a
bucket or any other suitable place.
Do not use foaming or corrosive detergent, as this kind of detergent could damage the
appliance !
7.4 Vacuum cleaning
0
I
10
For vacuum cleaning:
•
first switch on the switch behind on the vacuum cleaner.
•
switch on the vacuum switch (9) on the handle.
Please note that the vacuum system does not work when
the switch on the vacuum cleaner is on position off!
When the dirt bucket (12) is full, vacuum stops.
Unhook the bucket, empty it, hook again and then con-
tinue working.
To clean the polyester filter unhook the bucket and
take off the filter. Wash the filter and replace it, then
hook the bucket.
Please note that when the machine does not work, to
dry the dirt bucket (12), it is advisable to unhook it
from vacuum motor (11)
12
11
7.5 Refilling water
When the cold water tank is empty, you will hear an acoustic signal and on the display (4) appears
“H2O”.
Proceed as follows:
•
Open the cap (6) and fill water in the tank.
•
Close the cap (6).
•
Press the bottom (8) on the hose (you hear that the pump starts work)
•
Please wait some seconds that on the display (4) appears “5b” and start again the cleaning opera-
tions.
