© copyright Sti Srl - Rev. 0607 Vietata la divulgazione c/o riproduzione anche parziale
16
7. INSTRUCTIONS FOR USE
7.1 Preparation
Open the cap (12) and fill the cold water tank with tap water.
Connect the plug to a socket on a patchboard provided with a switch with an efficient earth connection.
►
The appliance is provided with a power cord according to its electrical input characteristics
►
Verify that the electrical mains are according to the norms
►
It is recommended that the power supply of this appliance includes a differential switch of
30 mA maximum
7.2 Starting
•
Switch on the boiler switch to start the boiler (1).
•
The display goes on (4) indicating the temperature in the boiler.
•
When the pump has filled up the boiler goes out.
•
The appliance starts heating up (about 4 minutes).
•
When on the display (4) appears “5b” the appliance is ready for use now.
•
Connect the steam hose to the socket (7) making sure that it is inserted correctly.
•
Push the steam button (8) on the handle and direct the steam jet towards the area which has to be
cleaned.
•
For vacuum cleaning press the button for suction (9).
•
The functions steam and vacuum can be used separately, and also simultaneously.
7.3 Detergent injection
To start the appliance follow the instructions explained under starting (7.2)
For the detergent function follow these instructions:
•
Open the tap (5) and fill up the tank with detergent.
•
Switch on the switch (2).
•
Push the bottom (10) to start the detergent function.
•
The functions steam, steam + detergent and vacuum can be used separately, and also simultane-
ously.
