STI Alert Point, Руководство по установке и Руководство пользователя

Страница: 4 / 20

-4-
Alert Point Installation
The reversible mounting plate can be
installed in any orientation; depending on
the required conduit entry and exit points. Mark the 4 fixing points (as shown) and
install using the screws and Rawl plugs
provided.
Pilot point x2
Pilot point x1
Step 1. Install the Reversible Mounting Plate
Fixing Points x4
Step 2. Attaching the chassis
Attach by pushing the chassis over the 4 fixing clips on the mounting plate (highlighted).
Fixing clip
Step 3. Consult the User Manual for other programmable features
(Programmable Features page 8 & DIL switch settings page 19)
Step 4. Attach front cover
Detail
Line up each end using the channels located on the raised conduit sections
(see detail). Push evenly until the cover locks into place via 4 raised mounting
clips situated on each corner.
Need technical support? Call us on +44 (0)1527 520 999