Ci-326
Page 2 of 3
REV 00D
2021 STI-CO Industries, Inc., 11 Cobham Drive, Orchard Park, NY 14127-4187
Technical Support: E-mail: [email protected] Phone: 1-716-662-2680 Fax: 1-800-685-1122
Made in U.S.A.
TUNING PROCEDURE
1. Set the center operating frequency by connecting an SWR meter directly to the base of the antenna.
2. Tune antenna to desired frequency by loosening the screws on the side of the tuning brackets.
3. Mark the final location of the tuning assembly.
4. Apply thread lock to the screws and secure the tuning assembly in place.
5. Reattach the matching network to the base of the antenna, and connect the feedline.
6. Use self tapping screws H-1251 to secure tuning bracket in place.
Tuning Assembly Screws
