StewMac I-5201, Руководство по сборке

Страница: 14 / 19

stewmac.com
14
Install the harness
There is not cavity access on this guitar, which means you
will need to feed the components in through the treble side
F-hole. Fish the neck and bridge leads and string ground out
of the body and solder them in place following the diagram.
Once soldered it's time drop the controls into the guitar and
then up through the mounting holes. This is a tricky job, our
#0255 Archtop Helping Hand and #0107 Jack Installation tool
make easy work of it. Another method is to first tie strings or
rubber bands to the shafts of the pots and switch and pull
them up through the mounting holes. For help with this
technique, see our Trade Secrets article “Fishing a volume
control out of a semi-hollowbody for soldering.”
Once the switch, jack and pots are secured install the knobs.
stewmac.com search:
ts0094