Stewart Filmscreen Visionary Medio, Руководство пользователя

Страница: 12 / 22

12 Stewart Filmscreen
1 Position ladders and or duct jack under area where the Visionary Medio screen assembly is to be
installed
2 Lift the screen assembly up to the case
3 Make sure electrical pigtails are clear of the screen assembly before positioning it
4 Position the screen assembly mount plates over the internal threaded rods Refer to Figure 8
5 Loosely install the nuts and washers on each end Note: Use the nuts and washers removed during
unpacking
6 Level the screen assembly by adjusting the nuts on the internal threaded rods Refer to Figure 9
INSTALLATION PROCEDURES (CONTINUED)
Figure 8: Installing the screen assembly
Mount plate
Threaded rod
Nuts and washers
Nut and washer
on threaded rod
Figure 10: Installing access cover plates
Tabs
Access cover plate
Slots
Figure 9: Leveling the screen assembly