Stewart Filmscreen Visionary Medio, Руководство пользователя

Страница: 11 / 22

Visionary Medio 11
INSTALLATION PROCEDURES (CONTINUED)
The IMC control is mounted in its own case Connect a 4-conductor wire from the IMC location and
feed it into the Medio’s housing Then the Molex / pigtail can be connected via wire nuts to that cable
Review Figure 7 for installation appropriate to the site and associated equipment
INSTALLING THE SCREEN ASSEMBLY
i i
CAUTION
During installation of the Visionary Medio screen assembly into the mounted housing, be advised
that damage can occur to the screen Perform the following actions to avoid damage:
`
When lifting the screen assembly up into the case, make sure the screen does not come into
contact with the sides of the case
`
When installing the screen assembly make sure that the screen never contacts or strikes any
objects as damage will occur as a result
Figure 7: Control system schematic