10
Stewart Filmscreen
ELECTRICAL
The Luxus product can be controlled through a number of remote control devices, including keypads,
dry contact outputs, and low-voltage trigger outputs
i
CAUTION
To be installed and/or used in accordance with appropriate electrical codes and regulations
Note:
This manual refers to “AC” to represent electrical power Your location may use 120 V, 220 V, or
other electrical power Screen systems are manufactured using the electrical power type specified for
the location Use appropriate power sources for your location
MOTOR WIRING
The Luxus’s screen motor is pre-wired at the factory No additional motor assembly is required
i
CAUTION
During installation, do not place the unit on an unstable cart, stand, table or ladder The unit may fall,
causing injury and damage to the unit
STANDARD CONTROL – KEYPAD
A standard, 3-button, low-voltage keypad is
supplied for the standard controller
Making the Connections
1 Connect the RJ25 cable to the keypad
2 Connect the other end of the RJ25 cable to
the Luxus unit
Note:
A breakout cable can be used into the
RJ25 jack on the unit The maximum length of
the RJ25 cable shall not exceed 50’ Dry closure
modules from any home automation system can
be interfaced, utilizing “up”, “down”, common”
type terminations with this control
