To decrease the screen extension:
1. Lower the screen until it is extended about halfway down.
Note:
If your Luxus screen has a screen trigger, leave in the up
retracted position.
2. Locate the white extension (down) limit switch on the left side of
the screen tube. You access the white limit switch through the
small electrical grommet located on the case next to the end
plate. Use a small electrician’s style screwdriver or a 5/32”
(.4 cm) hex wrench to turn the switch in a clockwise direction.
Note:
One complete turn of the switch will make approximately a
3/4" (2 cm) change in the screen's stop position.
3. Activate the screen in the down direction until it reaches the
newly reduced stop position. Repeat this procedure until the
desired stop position is reached.
Once you have made the adjustment, whenever you lower the screen, it will
automatically stop at the new position.
Note:
It is recommended that you make a note of any changes made to the
factory preset.
14
Stewart Filmscreen Corporation
