Stewart Filmscreen Corp AB Electriscree, Руководство пользователя

Страница: 10 / 20

8 Stewart Filmscreen Corporation
Installing the infrared remote control option
The optional Stewart Filmscreen infrared remote control allows control of
the screens from anywhere in the room.
Note: The distance between the hand-held remote control and the receiver
can be up to 50 feet. It is necessary to have uninterrupted line-of-sight
between the remote and the receiver.
Preparing the connection
Before making the electrical connections, you need:
K
An available 120V AC constant power source
K
A 4-conductor switch hook-up cable (4-conductor bell wire or
category 5 cable is typically used for long runs)
Making the connection
Figure 3 illustrates the connections.
1. Mount the infrared (IR) eye sensor near the screen.
2. Connect the 4-conductor hookup cable to the connection harness
coming from the J-box used for “switch input.”
3. Connect the hookup cable to the 3-button switch.
4. Connect the main 120V AC power source to the AC J-box.
5. A parallel connection to an outboard audio-visual switching
network can be made at this time. (optional)
Figure 3: Infrared remote control wiring
3-Button
Momentary Switch
Infrared Sensor
Infrared Remote Control
4 Conductor Hook-up Cable - 20ga Minimum
Category 5 recommended (NOT Supplied)
STOP-Yellow
COMMON-White
UP-Red
DOWN-Black
J-box for
Switch Input
COMMON-White
GREEN-Ground
HOT-Black