Fuselage
(continued)
17.
Fit and tack glue former F17 (sheet 02/09, 1/20 in. balsa) between fuselage sides where
indicated on plan.
18.
Fit and tack glue former F18 (sheet 01/09, 1/20 in. balsa) between fuselage sides at rear of
model.
19.
Fit and tack glue former F19 (sheet 08/09, 3/32 in. balsa) to underside of the rear of the
fuselage.
20.
Fit F20 (sheet 07/09, 3/32 in. balsa) to the top of F4 and F17, with aft end centered on top
of F18. Bond F17 and F20 permanently to fuselage sides, each other, F4 and F18.
21.
Fit and bond F21 (sheet 08/09, 3/32 in. balsa) to rear edge of cockpit, against F4. Note:
Lower edge of F21 will extend beyond exterior edge of cockpit. F21 will later be sanded
flush with edge of fuselage.
22.
Assemble and bond parts F22a (sheet 04/09, 1/20 in. balsa) and F22b (sheet 03/09, 1/20
in. balsa) to form a right and left keel F22. Fit and bond keel to the right and left notches in
bottoms of all formers, motor mount, and edge of F19.
Build Instructions
Swift (100)
- Build Instructions © 2014 Stevens AeroModel, all rights reserved.
!
Page 12
□
□
□
□
□
□