3
© 2005 Stevens AeroModel all rights reserved.
REQUIRED TO COMPLETE KIT:
Kit Contents
:
1.
Rolled Computer Drawn Plan Sheet
2.
Illustrated Instruction Manual
3.
Laser Cut Balsa and Hardwood Parts Sheets (See Cut Parts Inventory Sheet)
4.
Included Hardware
5.
2 - 1/8” x 17.5” Hardwood dowels
•
1 - 1/8” x 3” hardwood dowels.
•
1 - 6” length of servo guide tube (paper)
•
1 - #16 Rubber Bands (10).
•
2 - .045” x 5” Push Rods.
•
1 - Pair Balsa Aileron Stock.
•
1 - Pair Fiberglass Control Horns.
•
1 - Du-bro 845 E-Z Connectors (2/Pkg.)
Recommended Finishing Items
:
1.
One roll of AeroFILM covering available from www.stevensaero.com
Suggested Electronics:
1.
4 Channel Transmitter.
2.
2 - Hitec HS-55 Servos (use of HS-55 servos will negate the need for two 6” servo extensions)
3.
2 - 6” Servo Extension (Only required if you do not use the suggested HS-55 Servos)
4.
1 - 6” Servo “Y” Harness
Items You May Need:
1.
Thin CA (super glue) or White Glue
2.
Plan/Table Protector (use the bag that this kit came in to protect your work surface from CA glue spills)
3.
Razor Blade(s)
4.
Med-Fine Grit Sand Paper and sanding block
5.
Clear Tape
6.
Balsa Wood Filler