Build Instructions
Suggested Items to Complete this Model
Many of the suggested items listed below are available at your local hobby shop. For your convenience,
Stevens AeroModel stocks all the power system components and most of the building supplies required
to complete this kit. If you have difficulties sourcing any of these items locally, please visit our website,
stevensaero.com
to purchase the items necessary to complete your model.
Required Electronics
(brushed power system)
RC transmitter with at least 3 channels
Receiver/ESC/Servo brick (PKZ3352) or (SAR6410*)
Motor/Gearbox (PKZ3624) or (SA8523)
Propeller, 130mm x 70mm (EFL9051)
LiPo battery, 130 - 160 mAh 3.7V
Optional Electronics
(brushless power system)
Receiver/ESC/Servo brick (SPMAR64510LBL*)
SA Sport Park BL180 (2200KV)
5 x 3 GWS HD Propeller
Spektrum ultra micro receiver/esc/servo “brick” [SPMAR6410LBL]*
7.4V 120-160mAh LiPo compatible with Spektrum “brick”
*SAR6410 and SPMAR6410LBL must be used with a modern computer radio.
Covering Film Requirements
While any high-quality covering film may be used to finish this model, superior results will be achieved by
using genuine AeroLITE brand covering film, available exclusively from Stevens AeroModel. The lower
working temperature and light weight of AeroLITE are especially desirable for this type of model.
AeroLITE is one-third the weight of typical model covering films, and will present a significant weight
savings when applied to this model.
3 - PatchPaks
TM
AeroLITE or equivalent covering film.
QuickOats™ (100)
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
Page 4
Required Building Supplies and Tools
CA glue, medium, 1/4 oz (PAAPT04)
CA glue, thin, 1/4 oz (PAAPT10)
CA glue applicator tips (PAAPT21)
CA glue accelerator (PAAPT15)
Hobby knife with supply of #11 blades
Sanding block with 120 and 240 grit paper
Building Supplies and Tools
Covering iron and heat gun
Needle nose pliers, small
Clear tape, 1/2 in. (DUB916)
Velcro for mounting battery (PKZ1039)
Masking tape (low-tack blue painters’ tape)
AeroLITE
TM
covering film
Optional Building Supplies and Tools
Balsa filler (HCAR3401)
Modeling clay (ballast)
CA glue de-bonder (PAAPT16)
Required Building Supplies
Clear lacquer-based sealant (DEFT)
Lacquer-based spray paint (Design
Master
®
)