18
Before Installing
Read this manual carefully before installing the console. You must follow the
instructions for the product’s installation and connections to guarantee optimal
performance. If necessary, get in touch with our company.
Before use, pay attention to the following information:
• Make sure the appliance is switched off before adding or removing any
connections. This prevents possible damage to appliances connected to the
console;
• Keep all cables as far away as possible from the ignition cables, electronic
injection modules and the starter switch since they may cause noise interference;
• Always use good quality cables and connectors. This guarantees sound quality
and sound fidelity;
Introduction
The
STM 1003
sound mixer was developed to provide high performance and
sound fidelity with very low noise levels and harmonic distortion. It is ideal for
anyone who wants precise settings in order to produce professional sound.
Resources
The
STM 1003
has
3
input channels with
6
connections, which are for
Microphone
(XLR)
and
Lines (P10 and RCA)
, in addition to the multiplayer module which allows
even more connectivity. All inputs have rotary controls that act independently on
each channel, including:
•
GAIN
control to adjust the input signal level and 4 controls for ± 15dB equalization
(HIGH, MID HIGH, MID LOW AND LOW);
•
MUTE
switch that turns the channel and volume
(LEVEL)
on and off, which varies
in intensity from 0 to 100%;
• Signal indicator light
(SIGNAL)
which is green and signal saturation
(CLIP)
and
MUTE
indicators which are red.
• It has 1 main output channel
(MAIN)
that receives and mixes the signals from
all channels. The MAIN has 1 P10 connection and 2 RCA connections, a 60mm
sliding volume control (MAIN LEVEL) and a 12-LED VU Meter that shows the audio
signal level.
The
STM 1003
also has an auxiliary output channel
(AUX)
that receives the signal
from the MAIN and releases it through 1 P10 connection and 2 RCA connections
controlled by rotary potentiometers for volume
(LEVEL)
and phase adjustment
(PHASE)
.
