STERWINS 3276000313922, Сборка, использование, руководство по обслуживанию

Страница: 53 / 65

EN
52
SAFETY INSTRUCTIONS
body is earthed or grounded.
3. Do not expose power tools to
rain or wet conditions.
Water
entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never
use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges
or moving parts.
Damaged or
entangled cords increase the risk of
electric shock.
5. When operating a power tool
outdoors, use an extension
cord suitable for outdoor use.
You should only use extension cords
for outdoor use, PVC ordinary duty
with a cross sectional area not less
than 1.0mm2 for extension cord
up to 15 meters and 2.5 mm2 for
extension over 15 meters but less
than 40 meters.Use of a cord suitable
for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
Personal safety
1. Stay alert, watch what you
are doing and use common
sense when operating a power
tool. Do not use a power tool
while you are tired or under
the influence of drugs, alcohol
or medication.
A moment of
inattention while operating power
tools may result in serious personal
injury.
2. Use personal protective
equipment. Always wear eye
protection. Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
3. Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying the
tool.
Carrying power tools with your
finger on the switch or energizing
power tools that have the switch on
invites accidents.
4. Remove any adjusting key or
wrench before turning the
power tool on. A wrench or a key
left attached to a rotating part of the
power tool may result in personal
injury.
5. Do not overreach. Keep proper
footing and balance at all
times.
This enables better control
of the power tool in unexpected
situations.
6. Dress properly. Do not wear
loose clothing or jewelry. Keep
your hair, clothing and gloves