stertil SF 2522, Руководство по эксплуатации, Страница: 78 / 180

Operation Manual (Version: B) 34 Type SF
7. Place the locking pin back in the best fitting hole and secure it with the spring
cotter.
8. Switch the main switch to "1".
9. Press [deck up] briefly. The deck and the lip will descend until it rests on the
maintenance support.
Maintenance support
Remove the maintenance support
To remove the maintenance support:
1. Press [deck up] continuously to move the deck to the highest position with the lip
completely extended.
2. When the deck is at the highest position, switch the main switch to "0". The deck
will stay in the highest position.
3. Release [deck up].
4. Remove the spring cotter and remove the locking pin.
5. Slide the movable tube of the maintenance support upwards until you have the
minimum length.
6. Place the locking pin back in the best fitting hole and secure it with the spring
cotter.
7. Place the maintenance support back into its brace under the deck.
6.2.2 Waste disposal
Remove and dispose in a correct manner lubricating agents, used chemical
products and other such matter. On this subject, the local environmental
recommendations should be respected: see also section Environmental aspects
(on page 18).