31
FAULT
POSSIBLE CASE
REMEDY
No mains supply.
Have fault corrected by qualified electrician.
Mains fuse blown.
Replace fuse.
Mains switch OFF.
Set mains switch ON.
No mains power
(control power
indicator and mains
power indicator are
off)
LED’s faulty.
Contact the service department.
Push button indicator
(LED) flashes when
the
⇑
(UP) button is
pressed.
The column has reached the
maximum height.
The column will function normally if the
⇓
(DOWN) button
is pressed.
8.3
IDENTIFICATION
The lifting system has an identification label.
The label is located on the left side of the lifting column, above the control box.
9.
LIST OF PARTS AND APPENDICES
9.1
PARTS LIST
Index:
The numbers in this column refer to the numbers in the parts drawing.
Reference:
The numbers in this column are STERTIL-KONI part numbers.
Please give these numbers when ordering.
Description: This column gives the name of the parts.
9.2
ORDERING SPARE PARTS
Replacement parts can be ordered from Stertil, for addresses see §1.1.
The following information should be given when ordering spare parts:
Type of lifting system
: ST 1082-F/BAT, ST 1082-F/V/BAT or ST 1082-R/BAT
Serial number
: see preceding or identification label on lifting column.
Reference nr.
: see fig. A t/m K.
Содержание ST 1082-F/BAT
