6
7
Step 4 – poWeriNG tHe SyStem
Important Note:
The SWAR’s sensors
are self-adjusting; therefore, the ideal
sensor range for a given location will be set
automatically.
Before proceeding, check that there are no
foreign objects in front of the sensors withing
300
mm.
OBJECT
OBJECT
1
Remove the protective stickers that
cover the sensors, both on the Faucet
and on the Soap Dispenser.
Re-open the water shut-off valves.
2
To power the faucet and the soap
dispenser, run the end of the
transformer cord through hole B3
then connect it to the power splitter.
Plug the transformer into the main
power line.
B3
3
Wait about
10
seconds for the Faucet
and the Soap Dispenser sensors to
complete their self-adjustment.
10
SECONDS
ABOUT
4
Put your hands under the Faucet and
the Soap Dispenser and verify their
functionality.
iNStaLLatioN
FiLLiNG tHe Soap taNk
Step 5– FiLLiNG tHe Soap taNk
1
Unscrew the cover of the soap bottle
and fill with liquid soap.
2
Place the cover back and screw it
closed, making sure the hose extends
to the bottom of the soap bottle.
3
Press the refill button located on the top
of the pump assembly until soap starts
coming out of the soap dispenser spout.
This operation can also be done using
the soap dispenser remote control Refill
function.
