Stern 230510 Скачать руководство пользователя страница 2

1

IndeX

PRe-InsTALLATIon Info

the information in this document reflects products at the date of printing. stern engineering ltd  reserves the right,  subject to all applicable laws, at any time, at its sole discretion, 

and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the 

forgoing from the market. all information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied 

warranties of merchantability, fitness for a particular purpose, or non-infringement. stern engineering ltd  assumes no responsibility for errors or omissions in the information 

presented in this document. In no event shall stern engineering ltd  be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever 

arising out of or in connection with the use or performance of this information. the tradenames, trademarks, logos and service marks presented in this document, including their 

design, are the property of stern engineering ltd or other third parties and you are not permitted to use them without the prior written consent of stern engineering ltd  or such 

third party as may own them.

CheCk Contents

Separate all parts from the packaging and check each part with the pack contents sec-

tion. Pay attention to the variations of the different models.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic hand dryer until you 

obtain the missing parts.

Important

Installations in Australia and New Zealand must comply with the requirements of      

AS/NZS 3500. 

WArNINg

1) To avoid reflection problems keep a 

distance of more than 300 mm. between 

the sink and the spout.

2) Model that have  an infrared sensor 

pointing down, are not intended to be 

used together with a sink of a reflective 

material such as stainless steel.

Min 300 mm.

Bottom of the washbasin

PrE-INSTALLATION INFOrMATION

INSTrucTIONS FOr SAFE uSE

3  

TEcHNIcAL DATA - ALL MODELS

PAcK cONTENTS -  TuBuLAr HD

TEcHNIcAL DATA  - TuBuLAr HD

6  

PAcK cONTENTS -  TuBuLAr DP HD

TEcHNIcAL DATA - TuBuLAr DP HD

PAcK cONTENTS  -  EvEr HD

TEcHNIcAL DATA - EvEr HD

10-14          INSTALLATION

14 MAINTENANcE

15-16 

SETTINgS ADJuSTMENT

17 WArrANTY

Содержание 230510












Отзывы: