1. SETUP AND MOVING
2
2
5
5
7
7
1
9
8
11
14
15
14
11
8
6
1.1 FIRST-TIME SETUP
INSTRUCTIONS
CAUTION: AT LEAST TWO (2)
PEOPLE ARE REQUIRED TO
MOVE AND MANEUVER THE
GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME
CARE WHILE HANDLING.
STERN PINBALL MACHINES
WEIGH OVER 250LBS BOXED.
TOOLS REQUIRED
•
5/8” Socket Wrench
•
Utility Knife
•
Snips
•
A helper
Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sufficient help when
setting up your new game.
1. Locate the side labeled “TRUCK
THIS SIDE ONLY”. The bottom of
the game faces this side.
2. Open the top box flaps by pulling
hard in an upward motion on each
flap. If the flaps are taped, cut the
tape first, taking care to avoid the
box staples.
3. Remove the four (4) foam piec-
es and two (2) narrow box tubes
which contain the four (4) identical
legs with levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the
down position.
5. With the utility knife, carefully cut
down the left and right corners of
the box.
6. Let the face fall forward and
remove the entire side by carefully
cutting the bottom.
7. With the game still in its folded
position, use a ⅝” wrench to loos-
en and remove the 2 leg bolts on
each side of the front cabinet. En-
sure the leg levelers are screwed
all the way in to the legs.
8. Install front legs using the bolts
removed from Step 5. Secure
tightly.
9. Use a helper to carefully set the
game down on the front legs.
10. Set aside the open box.
11. With the ⅝” socket wrench, loosen
and remove the 2 leg bolts on
each side of the rear cabinet, 4
total.
12. Using supports or two people,
prop the rear of the cabinet up.
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
SETUP AND MOVING
3
© 2015 KISS Catalog, Ltd.
Under License to Epic Rights.
KISS PRO MANUAL
#500-55H1-01
