Document #
5 of 19
Revision Date
82070-248, Revision A
1/19/2009
Connecting the monitor and powering on/off
Step 1: Unpacking the carton
Included in the carton are the following items:
1 VividImage HD Wide Screen Monitor
1 S-VIDEO Mini Din 4 pin cable
1 Power Cord
1 Component Mini Din 8 pin cable
1 Remote Control
1 RS232C D-sub 9 pin cable (Optional)
1 RCA Cable
8 Mounting screws
1 DVI-D 24 pin cable
1 Quick Start Guide
1 D-SUB 15 pin cable
1 Operation Manual (this document)
If any one of these items is missing, please call Customer Support at (877) 887-1788.
Step 2: Mounting the monitor
The monitor can be used on the included stand or can be mounted using the eight included screws. To
remove the stand, unscrew the two screws that attach the stand to the monitor. Take the stand off. The
hole pattern for the eight screws needed to mount the monitor can be seen in the drawing below.
Unscrew the eight screws from the back cover. It is recommended that you use all eight screws when
mounting the monitor using a wall mount kit (not included). You must use at least four of the screws, either
in the four center holes or the four outer holes. Follow the directions that come with the wall mount kit to
complete the installation.
Unscrew these two screws to remove stand
Eight mounting holes
and screws
