3-6
066832
Operator Manual
Operating Instructions
3.3.2 Returning to Chair
Mode
Support the leg section, turn the lever counterclockwise while pushing in on the
lever (Figure 3-12). The lever will slide inward to an inactive position. Once the
lever is inactive, adjust the leg section until it is in line with the back section
(Figure 3-13). It will click as it reengages with the back section.
Figure 3-10
3.3 Independent Leg
Section
W A R N I N G – P E R S O N A L
INJURY HAZARD: The VIC
chair has a warning label on
the top of the base cover
that states: When chair is in
the non-transport mode:
Patient must remain fully
upright; Patient must never
be reclined; Patient must
never be left unattended.
3.3.1 Independent
Operation
Hold and support leg section by the bottom of the frame tube (Figure 3-9). Pull
out on the end of the red lever (Figure 3-9). Rotate the lever clockwise while
positioning the leg section (Figure 3-10). Once desired position of the leg
section is reached, release the lever and the leg section will be ridged (Figure
3-11). When the leg section is independent, it can be repositioned at any time
by turning the lever clockwise (Figure 3-10).
NOTE: Always support the leg section when turning the red lever.
Figure 3-9
Figure 3-11
Figure 3-12
Figure 3-13
