
7
2. PRESENTATION
2.1 General description
STERILOR
Sel
devices
automatically
produce Chlorine in the form of Sodium
Hypochlorite (bleach), through salt water
electrolysis between 4 and 5 g/litre.
By maintaining a balanced pH around 7
(neutral pH), and a good level of stabiliser of
the chlorine (30 to 50 mg/l), the waterin your
swimming pool will be perfectly treated
throughout
the
year
without
the
unpleasantness of a conventional chlorine
treatment (odours, storage and handling).
2.1.1 Operation
The automatic
STERILOR Sel system
operates on the principle of salt water
electrolysis.
Thanks to its microprocessor, STERILOR Sel
controls the emission of a low voltage electric
current towards an electrolysis cell placed on
the backflow of the filtration circuit (after any
analysis electrode as well as any booster
compressor or heat pump, or heating outgoing
cable).
This cell contains several electrodes made
of titanium and specially treated with
precious metal oxides, in order to withstand
changes in polarity of the production current
and better exchanges between the plates.
The pool water with a very low salt content (4 to 5
g/l), passes into the electrolysis cell and
transforms
into
sodium
hypochlorite
(Bleach), which is a powerful steriliser.
STERILOR Sel therefore prevents you from
having to add chlorinated products. All you
have to do is maintain the water's pH between
6.9 and 7.4.
STERILOR Sel is compatible with a l l
current swimming pool liners, and it adapts to
any existing or new filtration systems.
Warning
:
Salt is incompatible with metal filtration
systems.
When adding salt to the pool for the first time
or during each subsequent addition, STERILOR
Sel must be switched off for at least 24 hours,
and total dissolution of the salt must be
validated before starting or restarting the
device.
The advantages of STERILOR Sel
:
Automatic water treatment
Sterilised and sterilising water
A change of polarity in the production current
which reduces the formation of scale on the
electrodes
Backlit digital display of the production
percentage, device operating times and
countdown of the change of polarity time
A configurable Slow mode function for
swimming pools equipped with covers
A device that can be adapted to all swimming
pools
2.1.2 Supply
This device is supplied with all equipment
necessary for its installation and use. This kit
includes:
A control box with a pre-wired power
supply cable.
An electrolysis cell with its electrode and
cable equipped with quick connectors.
A connecting cable to servocontrol either in
Slow mode or Cover mode for swimming pools
equipped with contact covers or to
servocontrol with a chlorine measurement
A blade flow sensor.
+ A salt analysis kit
+ Installation and user instructions
+ Guarantee form
Содержание Sel
Страница 2: ...2 ...