background image

 

 

 

Installation and Operation Manual 

 

UVC Controller 

MODEL: 8100PVAB 

100/120/208/240VAC 

40A 9.6KW MAX 

UL Approved 

UL File Number E841436 

                                                                                                                                     

Patents: 5,334,347/ 5,817,276/ 5,866,076/ 6,245,293/ 6,267,924/ 6,280,686/                                              

 

 

6,313,470/ 6,372,186/ 6,423,882/ 6,500,267 /6,589,476/ 6,627,000/ 

6,783,578/7,140,749/ 7,282,728/ 7,459,694 & others pending 

                                                       

Made in the USA

 

 
 
 
 

NOTE: Read the entire manual  

before starting the installation. 

 
 

 

Improper  installation,  adjustments,  alterations,  service, 
maintenance,  or  use  can  cause  fire,  electrical  shock, 
personal injury or property damage.  Consult your supplier 
or Steril-Aire for information or assistance.   
 

DANGER

WARNING

, or 

CAUTION

 are universally used 

for  overall  safety.   

DANGER 

identifies  the  most  serious 

hazards  which  will  result  in  severe  personal  injury  or 
death.  

WARNING

 signifies hazards which could result in 

personal  injury  or  death.   

CAUTION

  is  used  to  identify 

unsafe  practices  resulting  in  minor  personal  injury  or 
product and property damage.   
 

WARNING:    Before  performing  maintenance, 

ensure unit is unplugged. Electrical shock can cause 
death.  
 

CAUTIONS:

   

 

Never  expose  eyes  or  skin  to  UVC  light.    Wear 
gloves, face shield/glasses (per ANSI Z87.1) and 
cover all exposed skin.  

 

Do  not  touch  Emitter

TM 

glass  without  gloves.  

Damage  to  Emitter  may  result.    Oil  from 
fingerprints  will  permanently  etch  glass  of 
Emitter  and  weaken  structure.    Clean  Emitter 
using  a  Steril-Aire  cleaning  kit  (included). 
Isopropyl  alcohol  and  a  lint-free  wipe  may  be 
substituted. 

 

UVC  Emitters  are  fragile.    Handle  UVC  Emitter 
with care. 

  

 

Voltages  outside  of  the  range  designed  for  the 
unit  will  void  the  warranty  and  do  permanent 
damage to the entire unit. 

  

 

Emitters contain mercury.  If an Emitter breaks, 
clean  and  dispose  of  with  the  same  care  as  a 
fluorescent lamp.   

 

UVC 

energy 

can 

damage 

non-metallic 

components. Protect such components with UV 
resistant  material  such  as  aluminum  foil, 
aluminum duct tape, metallic shields, etc.  

 

The  qualified  installer  or  agency  must  use 
factory kits and accessories when installing this 
product.

  

 

I

MPORTANT

 C

ONSIDERATIONS

 

Содержание 8100PVAB







Отзывы: