Settings and workflow____________________________________________________________________________________5
2. Settings and workflow
Settings on the Pulse
•
GLB Param - Midi Channel – should be the same midichannel as the one of the Synth Programmer
•
GLB Param – ID – should be 0
Settings on the Synth Programmer
•
The midichannel of the Programmers should be the same as the Pulse's. How to change midichannel on
the Programmer is described in
Chapter 8. Prefs Mode
Brief workflow overview
Normal operation looks like this:
Select a program on the Pulse then synchronize the Programmer with the Pulse. Every time you want to begin
editing another program you need to 'request' it on the Programmer or 'dump' it from the Pulse to the
Programmer.
In cascading mode things are a little easier: changing programs updates the Programmer automatically. More
about cascading in
Chapter 10. Cascading
Saving programs
A program can be saved in two ways:
•
Saving the program in the Pulse's memory:
◦
press SHIFT & STORE on the Pulse
◦
select a target position between 01-40
◦
press SHIFT & STORE again
•
Saving the program in the Programmer's EEPROM, see
Chapter 7. E-Patch
Synth Programmer for Waldorf Pulse – Operation manual V 1.0 – 01/2018
© Stereoping Germany, Meschede 2018
