ENGLISH
ENGLISH-2
Before using your new Analog Multimeter, please read this
instruction manual to prevent any damage. Put them away
in a safe place for future references.
GENERAL SPECIFICATIONS
This new multimeter has been designed to measure DC and AC
voltage, DC current, resistance (
Ω
), 1,5V battery test (AA/AAA),
and includes a fuse to protect the multimeter.
RANGES (15 DIFFERENT MEASURING RANGES)
DC voltage : 2,5V/ 10V/ 50V/ 250V/ 500V
AC voltage : 10V/ 50V/ 250V/ 500V
DC current : 0,5mA/ 10mA/ 250mA
Resistance : R x 10
Ω
/ R x 1K
Ω
Battery test : 1,5V
Accurate : ±4% of the scale
Sensitivity : 4,000
Ω
/VCD 2,000
Ω
/VCA (~)
Dimensions : 97x 63 x 30 mm
Decibels : -20dB to + 22dB in ranges of AC voltage
CAUTION
Follow all the operating and security instructions in order to use
the multimeter safe and correct.
ADVICES TO USE THE MULTIMETER
When you use this multimeter pay attention to the polarity.
Connect the red tip to the positive jack, the black tip connect to
the negative jack.
If you don’t know the voltage and current when you are
measuring,
fi
rst use the higher range, and step by step, diminish
the value until you can see the correct value.
For accurate readings, search the scale from the point where
the arrow is aligned with the extreme scale, in order to avoid a
mistake.
CALIBRATION
To set the ohm range to zero,
fi
rs locate the central button (looks
like a screw), then use a screwdriver and put the arrow from the
panel to zero (in the left side), then insert the black and red tips,
put them together and in the scale of Rx10 you will see that the
arrow will move to the left side. Use the knob to set to zero.
Before using your new Analog Multimeter, please read this
instruction manual to prevent any damage. Put them away
in a safe place for future references.
