Before using your new Emergency LED Lamp, please read this
instruction manual to prevent any damage. Put it away in a safe
place for future references.
IMPORTANT
Do not use or store the equipment near wet places. May cause
malfunction or electrical shock.
Warranty is void if you try to open the lamp.
Do not try to open the equipment, may cause malfunction.
Do not expose the equipment to extreme weather.
Battery replacement can only be made by authorized personnel.
Clean only with a soft, dry cloth.
Battery must be fully charged and discharged every three months
in order to improve its life.
CONTROLS
1.- Test / Charge
When you connect the camera to an AC outlet, this button will be lighted
in red, indicating the battery is charging. With the lamp plugged to the
outlet, press this button to test it.
2.- Off / Power
Connected to the outlet, this button will be lighted un green, indicating
that the energy is well provided.
3.- On / Trouble
With the lamp unplugged from the outlet, press this button to light the
lamp on.
If there are troubles (see list below) with the lamp, this button will be
lighted in yellow.
Failures:
Low battery energy
No LEDs or damaged LEDs in the lamps
4.- Lamps
•
•
•
•
•
•
•
•
•
Before using your new Emergency LED Lamp, please read this
instruction manual to prevent any damage. Put it away in a safe
place for future references.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the
original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package,
and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service,
at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow
enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your nearest dealer. If you are in
Mexico, please give a call to our Call Center.
Call Center
01 800 500 9000
Product: Emergency LED Lamp
Part number: LAM-500
Brand: Steren
INSTALLATION AND HOW TO USE THE LAMP
1.- Plug the power cord into an AC outlet.
2.- Charge and Power LEDs light on
3.- After 5 minutes, unplug the lamp from the outlet, it will simulate a
failure in the energy. Automatically it will light up.
4.- If you want to turn the lamp off press Off / Power button.
5.- Reconnect the lamp to the outlet, the lamp will turn on automatically
when the power supply fails.
6.- Remember, you can place the lamps in the required position.
You must plug the lamp permanently to an outlet in order to use
the emergency power on.
You can place the lamp in a wall, just drill the wall following the
holes in the rear side of the lamp.
For a fully battery recharging, plug the device into an outlet for 24
hours.
With a full battery you will have 18 hours of continuous use.
SPECIFICATIONS
Input:
120V~ 60Hz 4,5W
MAX
Output:
2x0,5W
Battery type:
6V
4Ah
LEDs:
2x100mA
Charging time:
24 hours
Working time:
>18 hours
Humidity:
<90%
Time after a
failure:
<1s
Working
temperature:
-10°C to 50°C
Product design and specifi cations are subject to change without
notice.
1
2
3
4
4
You must plug the lamp permanently to an outlet in order to use
the emergency power on.
You can place the lamp in a wall, just drill the wall following the
holes in the rear side of the lamp.
For a fully battery recharging, plug the device into an outlet for 24
hours.
With a full battery you will have 18 hours of continuous use.
Product design and specifi cations are subject to change without
notice.
