background image

Click the Connect button to connect immediately, Click the 
Disconnect button to disconnect immediately.

- Connect on Demand - You can con

fi

 gure the router to 

disconnect your Internet connection after a speci

fi

 ed period of 

inactivity (Max Idle Time). If your Internet connection has been 
terminated due to inactivity, Connect on Demand enables the 
router to automatically re-establish your connection as soon as 
you attempt to access the Internet again. If you wish to activate 
Connect on Demand, click the radio button. If you want your 
Internet connection to remain active at all times, enter 0 in the 
Max Idle Time 

fi

 eld. Otherwise, enter the number of minutes you 

want to have elapsed before your Internet connection terminates.

Caution: 
Sometimes the connection cannot be disconnected 
although you specify a time to Max Idle Time, since some 
applications is visiting the Internet continually in the 
background.

- Connect Automatically - Connect automatically after the router 
is disconnected. To use this option, click the radio button.
- Connect Manually - You can con

fi

 gure the router to make it 

connect or disconnect manually. After a speci

fi

 ed period of 

inactivity (Max Idle Time), the router will disconnect your 
Internet connection, and not be able to re-establish your 
connection automatically as soon as you attempt to access the 
Internet again. To use this option, click the radio button. If you 
want your Internet connection to remain active at all times, enter 
“0” in the Max Idle Time 

fi

 eld. Otherwise, enter the number in 

minutes that you wish to have the Internet connecting last unless 
a new link is requested.

Caution: 
Sometimes the connection cannot be disconnected al-
though you specify a time to Max Idle Time, since some 
applications is visiting the Internet continually in the 
background

Caution:
Sometimes the connection cannot be disconnected
although you specify a time to Max Idle Time, since some
applications is visiting the Internet continually in the 
background.

Caution:
Sometimes the connection cannot be disconnected al-
though you specify a time to Max Idle Time, since some 
applications is visiting the Internet continually in the 
background

ENGLISH

ENGLISH-27

Содержание COM-820









































































































































































Отзывы: