Steren AMP-160, Руководство пользователя, Страница: 7 / 29

5.- Mute LED
Lights on when mute button was
pressed
6.- Volume
Use this knob to control the volume
level of the selected channel. If you
turn it to the right, the volume will
raise, if you turn it to the left, the
volume level will decrease.
7.- Zone selector
Press the desired buttons to assign
a zone. Whole zones can be
operated at the same time.
8.- Phone volume
Set the volume level of the device
plugged to Phone connector.
9.- Phone
The amplifi er’s audio signal can be
sent to the connected headphones.
10 Monitor volume control
This knob allows you to set the
monitor volume output level.
11 Zone 1 volume level
Use this knob to control the volume
level of the Zone 1 signal output
12 LED VU-metre
Indicates the overall output signal
level
13 Monitor selector
Press Monitor, the signal from the
amplifi er 1 will connect to monitor
volume. Press Monitor once again,
and the connection signal will be
cut. Other three buttons are
operated in the same way.
8
9
10
Phone
Volume
Monitor
Volume
Phone
MUTE
Z3
Z1 Z2
Z4
Zone
Selector
VOL
4
5
6
7
MON
VOLUME
ZONE 1
11
12
13
ENGLISH
ENGLISH-7
5
6
7
8
9
10
11
12
13